|
Model No. |
JE03 |
JE04 |
JE08 |
|
Input |
Voltage & Frequency Range |
100-240VAC;50Hz/60Hz |
|
AC Current(Max) |
0.23A at 115Vac/0.11A at 230Vac |
0.29A at 115Vac/0.16A at 230Vac |
0.24A at 115Vac/0.13A at 230Vac |
|
Power Factor |
＞0.95 at 115Vac/＞0.95 at 230Vac with full load |
|
Inrush Current(max) |
＜20A at 120Vac |
|
Leakage Current |
＜1mA/240Vac |
|
Output |
DC Voltage Range |
38±7V |
38±7V |
38±7V |
|
Constant Current Range |
330mA max |
500mA max |
450mA max |
|
Rated Max. Power |
15W |
25W |
20W |
|
Ripple & Noise(Max.) note.2 |
6.6vp-p |
6.6vp-p |
6.6vp-p |
|
Efficiency note.1 |
82% |
82% |
82% |
|
Protections |
Over Current |
110%-120%Constant current limiting, auto-recovery |
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
|
Environment |
Working Temp |
-20℃～50℃ambient operating at full load |
|
Working Humidity |
20%～90%RH non-condensing. |
|
Storage Temp.,Humidity |
-20～+80℃，10%～ |
|
Safety & EMC |
Safety Standards |
meet EN61347-1EN61347-2-13,UL1310 |
|
EMC Standards note.3 |
meet EN55015,EN61000-4-2,3,4,5,6,8,11,EN61547 |
|
Withstand Voltage |
I/P-O/P:3.75 KVAC |
|
Isolation Resistance |
I/P-O/P:100M ohms/500VDC at25℃ |
|
Connection |
Input |
3P Spring terminal block |
|
Output |
2P screw terminal block |
|
Others |
MTBF |
100K hours min.@ta=25℃ |
|
Dimension(L*W*H) |
120*40*28mm |
|
packing(L*W*H)Carton |
385*285*210mm;70pcs/6.6Kg |
|
Note |
1.All parameters NOT specially mentioned are measured at 230V AC input,rated load and 25℃ ambient temperature. |
|
2.Ripple &Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf &47uf parallel capacitor. |
|
3.The power supply is considered a component which will be installed a final equipment.the final equipment must be re-confirmed that is still meets EMC directives |
